lumatek-ballast

Lumatek-ballast

Lumatek digital ballasts are the most advanced lighting solution for modern horticulture. Small, compact, and completely silent these E-Ballasts are able to deliver more lumens while using less electricity than standard magnetic ballasts.

Unlike traditional ‘core and coil’ magnetic ballasts, Lumateks are microprocessor-controlled and able to evaluate and compensate for the actual state of lamp degradation and voltage fluctuations in power supply from your local grid. This means that Lumateks are able to provide a precise controlled output voltage to the lamp ensuring optimum PAR levels are achieved.

Lumatek products include Super Lumen and Multi-Watt Dimmable ranges: 250w, 400w, 600w, dual 600w, 750w and 1000w

LUMATEK-BALLASTS

Why Lumatek Electronic Ballasts?

More lumen output

Up to 30% more lumens output than some old style magnetic ballasts …More light equals more yield. We urge you to test this yourself with a good quality light meter. Be sure to also check how much power the ballast is using with an ammeter as many so called 600w magnetic ballasts now draw up to 750w as standard to try to keep up with Lumatek’s lumen output.

More lumens generated per watt of electricity consumed

Lumatek E-Ballast have increased efficacy over magnetic ballasts. They lose fewer watts from the power supply to the lamp. The high frequency output results in low power loss at the cathodes in addition to better overall power management.

Stable light output

Excellent for Pharmaceutical-agriculture, laboratories and other uses where precise regularized output is essential.

Fast start-up

It reaches full brightness in under one minute; magnetic ballasts typically take about twenty minutes.

Completely silent

No noise or vibration of any kind

Small compact design

Lumatek 600watt 240V E-Ballast weighs 3.0 kilos compared to almost 20 kilos for magnetic ballasts.

Produce less heat

Less heat generated by the E-Ballasts makes temperature control easier and allows cooler running of the environment

Cut-off circuitry

Lumatek E-Ballasts cuts off when a short is detected; for ultimate safety.

Longer bulb life

Lumatek E-Ballasts output loss over time, with the correct lamp, is dramatically less than with magnetic ballasts.

Fully interchangeable

Lumatek E-Ballasts can light both HPS and MH bulbs (excluding the 750w which is HPS only).

Leave a Reply

Your email address will not be published. Required fields are marked *